Smart Current Logger

Smart Current Logger

Smart Current Logger is a simple AC current sensing instrument that can measure upto 3000A .Automatic Current range selections 1-3A, 3 to 30A, 30 to 300A & 300 to 3000A are available. The Current logger has in-built Bluetooth transceiver that enables it to communicate with any Smart Phones or Tablets via SANDS Android mobile application. Smart Current Logger also has analog voltage output that can be easily plugged in to any multimeter and the measurement quantity can be viewed on the multimeter. The Analog output has two 4mm banana plugs that enable it to get connected to any multimeters.


Smart Current Logger uses 150mm dia Rogowski coil to measure the AC current non-intrusively on any AC line. Rogowski coils are flexible current transformers that are ideal for use when space is limited. The flexible form factor means they can easily fit into tight panels and come in a range of sizes to suit most installations. The accuracy achieved is +1%. It operates with a simple rechargeable 9V alkaline battery.

Real Time viewing of Current waveforms on a graphically enriched display. Possibility to zoom and observe the waveforms, analyze harmonics and transients at site due to various loads. A wireless interface gives the user an option to stay at a safe distance from the electrical systems like high voltage points. The App based data logging tool makes the data instantly accessible on the cloud for analysis and archival. It also provides the option to capture the current waveforms at any instance.

  • Flexible current sensor that easily fits into any busbars where space is the limitation
  • 3V RMS output that can be measured using any multimeters or powermeters.
  • Current sensing range 1A to 3000A
  • The in-built Bluetooth transceiver enables it to communicate with the current measures any Smart phone
  • Automatic Gain selection for current 1-3A, 3-30A, 30-300A, 300-3000A


Nominal Range 3A ;30A ;300A ;3000A
Measurement Range 3A: 1 to 3A
30A: 3 to 30A
300A: 30 to 300A
3000A: 300 to 3000A
Resolution +1%
Type of signal measured Sinusoidal
Instrument turn ON time 1 minute
Position of the conductor in the coil centred
Sensor Diameter 150mm
Sensor Length 510mm
Bandwidth Yet to be tested
Power supply 9V Hi-Watt Alkaline battery
Weight Yet to be measured
Dimension 118mm x 78mm x 33mm
Transformation Ratio Voltage output (Analog & via Bluetooth)
Output Signal 3A: 1V/A
30A: 100mV/A
300A: 10mV/A
3000A: 1mV/A
Phase Shift <1deg
Load impedance >1Mohms
Battery life 120 hrs
Approximately 720 10-minute measurements
Output termination 0.5mm lead with two 4mm safety banana plugs
Unit current consumption Max.80mA
Battery indications Flashing Red LED
LED Indications Power ON : Red
Low Battery : Red
Bluetooth COM : Blue blinking