GPS Wireless Clock

GPS Wireless Clock

GPS Clock offers an easy, cost effective solution for accurate, synchronized time displays without expensive, disruptive installation procedures. Because there are no wiring requirements, installation times are drastically reduced. It is ideal for renovation projects, as there is no need to worry about installation work, as well as new construction. The GPS clock can be synchronized through GPS Antenna or Wireless Antenna. The display can be wall / panel / table top mountable. It can used as wireless clock to synchronize many wireless slave clocks in and around the buildings.

Category: .

Features

  • Accepts Time Signals from GPS Antenna or Wireless Antenna
  • Available in 50mm, 100mm,144mm& 300mm sizes
  • High bright 7 segment display to show GPS Time
  • Input power supply can be customized
  • Rugged and Robust displays
  • Battery backup provided for the RTC
  • Cabinet with powder coat finish
  • Wall / Panel / Table top mountable
  • Time signal input status and GPS lock status can be identified with colon LED
  • Front plate covered with Red color acrylic sheet

Applications

  • Power Plant
  • Substation
  • Airport
  • Railway station
  • Bus stand
  • Industries
  • Hospital
  • Educational Institutions
  • Malls
  • Large campus

Specifications

Power Supply
Standard 85 to 260V AC, 1φ, (47Hz to 63Hz)
or 90V to 370V DC
Custom* 18V – 36V DC (24VDC) or 36V – 72V DC (48VDC)
Power Consumption <10W
Display
Display Type 7 Segment
No of Digit 6 Digit
Time Display HH:MM:SS
Display Size 50mm/100mm/144mm/300mm
Color Bright Red
Input Signal
Input* GPS Antenna / Wireless Antenna
Output Signal**
Output1 (Optional) NTP/SNTP (10/100Mbps)
Output2 (Optional) IRIG-B
Output3 (Optional) RS485/ RS232
Output4 (Optional) Wireless Transmitter (865 to 868MHz)
Environment
Operating Temp 0°to 50°C
Humidity 95% Non-Condensing
Mechanical
Mounting Wall/Panel/Table Top Mountable
Protection Class IP20/IP55
Note1:
Battery backup provided for RTC
50mm clock cannot give output signals other than Wireless output.

Note2:
* Any one of the input signal can be acceptable. It can be selected during order stage.
** Output signals are optional. It can be selected during order stage.