PHYTER to Fiber Optic Converter

The SMC-41-FE is a rugged, industrial-grade 10/100M PHYTER to fiber optic media converter card, which provides one channel for media conversion between 10/100BaseTX and 100BaseFX. It supports either multi-mode or single-mode fiber optic It comes with ST/SC/FC connectors for fiber optic links and can extend the 10 / 100M Ethernet distance to 2km for multi-mode and 20 to 120km for single-mode. The card can be mounted directly on cabinets with help of spacers and screws. It operates at 5VDC.

Features

  • Converts 100M Ethernet to Optical Fiber Signals and vice versa.
  • Multi-modeor Single-mode with ST/SC/FC
  • Fiber Optic distance is 2km for multi-mode and 20 to 120km for single-mode.
  • Supply voltage is 5V DC
  • Store-and-forward mechanism.
  • LED indications.
  • Supports a wide range of fiber optic cables.
  • Built-in surge protection, static protection and circuit protection.

Technical Specifications

Model: SMC-41-FE
Compatibility: IEEE802.3u 100Base-TX and IEEE802.3x 100Base-FX
Power Source: 5V DC
Speed: 100BaseT: 200Mbps full-duplex
Wavelength: 1310nm
Usable Fiber Optic Cables: Multi-mode: 50 / 125, 62.5 / 125km
Single-mode: 8.3 / 125, 8.7 / 125, 9 / 125, 10 / 125km
Distance (Ethernet): 100BaseT: Cat. 5 up to 100m
Distance (Fiber Lines): Multi-mode: 2 km;
Single-mode: 20 to 120km
Connectors (Ethernet/Power): 2×5 pin male berg with 2.54mm pitch
Connectors (Fiber Links): ST/SC/FC Connector
Dimensions (H x W x D): 15mm x 75mm x 38 mm +2mm
Weight: 50 g
Operating Temperature: 0° to 55°C
Operating Humidity: Up to 95% RH (no condensation)